Content Comparison

...

Every Sensum device has an associated driver that tells the platform how the incoming data is formatted.

1. If you haven’t already, create a Sensum account and log in.

2. Navigate to your projects devices and select Sensum Market at the top right of your screen.

3. Search for your device's driver using the your devices model number in the Driver Name field. (find your driver here)

4. Select Actions → New Device from themenu to the right of the driver.

...

• A Name is required of all devices and must unique to the platform. Alpha-numeric characters with spaces, - and _ are allowed. e.g. 12_Smith_st Smart-meter

• A DevEUI is required of LoRa devices and is your device ID on the LoRa network. Find yours here.

• ID Sigfox is required of Sigfox devices and is your device ID on the Sigfox network. Contact us if you don’t have this

• A Location can be set for every device by dragging the pin on the map tool or entering an address

• The Motion field sets if the device is static or in constant motion. If you select motion the location will be updated using the devices GPS coordinates.

• The Credential field is a token that is sometimes required depending on your IoT network.

• A MODBUS Unit Identifier is also sometimes required. This is a unique number unique between the devices in your project. e.g. 63between 1 and 254.

• MODBUS Master IP Address enter: 1 client IP address for MODBUS connection, set as 0.0.0.0 for open access.

...