Content Comparison

...

1. Navigate to Packet Forward → Settings

2. Set the Server Address to the IP of your NanoNANO. 192.168.12.1.
   Will be different to below if you are connecting to the gateway via Ethernet.

...

Frequency Band

1. Navigate to Packet Forward → Settings

2. Set Central Frequencies for Radio 0 and Radio 1 based on the frequency band of your region( see below)

...

1. Navigate to Network → Wireless

2. Set encryption to WPAWPA2-PSK

3. Enter new password in Key

...

Connect the Gateway to the

...

NANO via WiFi

1. Navigate to Network → WAN

2. Select the Wireless Extender tab near the top

3. Change Extender mode to enableand click Scan

4. Now from the drop-down menu beside Scan, Select your Nano NANO (NANO-XX)

5. Enter the Password you just created above into the Key field

6. Click Save and the Gateway will Reboot.

...

Registering the Gateway on

...

the NANO’s LoRaServer

The Nano NANO acts as the LoRa Server for your local LoRa network. This server is accessible through the admin account and is where you add devices and gateways to your network.

1. Reconnect to your NanoNANO like you did before

2. Go to the URL monitor.nano.local:8080

3. login with: user: admin password: admin

4. Navigate to Gateways → Create

5. Enter your gateway’s details
   Gateway ID: Can be found at Packet Forward → Settings under Gateway Info, first row.
   Name: Choose a name for your gateway

6. Click Create.

...

Test Gateway Connection

1. Navigate to Gateways → Femto-<last 6 digits of MAC>

2. Under Last Seen should be a recent time

...

Registering your gateway

...

on the

...

NANO

If you’d like to see uptime information about your gateway, we can add it to the platform.

1. Navigate to your dashboard.

2. Go to the IQNexus marketplace ('DevelopersDevices' → ‘IQNexus marketplace’).

3. Find a driver called ‘Loraserver Gateway’, and from the action menu select ‘New Device’.

   Image Removed

4. Under DevEUI, fill in the gatewayID, for example '80029c4939c9'

5. Under name, fill in the name of the gateway, for example ‘Femto-48D62C’

6. If you have modbus Modbus or bacnet BACnet enabled, please fill in your modbusModbus/bacnet BACnet details.

7. Next, at the message calculator, fill in how many messages you would be expecting and for how long you’d like to store the messages.

8. Fill in the remaining configuration and press ‘Apply’.

9. You will be taken to the gateway list page, also accesable accessible through ‘Devices’ → ‘Gateways’.

10. You can now select a gateway and view the associated data.

...

...