...
This article contains all the required information to configure and connect your Gateway to the NANO.
...
.
Connect to the Gateway via Wifi
Power the Gateway and ensure the power light goes fixed green.
The SSID will be "AP-<Last 6 digits of MAC> and can be found on the back of the gateway.
Select the device and click Connect.
Open a Browser and browse to 192.168.55.1
Login with: user: admin password: admin
Point Gateway to the NANO
Server
Navigate to Packet Forward → Settings
Set the Server Address to the IP of your NANO in the local network. (This can be found in your local DHCP server or in your Static IP assignation table).
...
| Note |
|---|
Please note that if you have received a pre-configured system you can skip the following steps. |
Connect the Gateway to the NANO via WiFi
...