Content Comparison

...

Fix intro.The LoRa Gateway included is pre-configured easy to configure and connect with to your Nano system NANO and provides the link between the Nano NANO platform and your devices. Depending on the number of devices and area you are covering, you may need more than one gateway. =

This article contains all the required information to configure and connect you Gateway with the NANO

Connect to the Gateway via Wifi

1. Power the Gateway and ensure the power light goes fixed green.

2. The SSID will be "AP-<Last 6 digits of MAC> and can be found on the back of the gateway.
   

   Image Added

3. Select the device and click Connect.

4. Open a Browser and browse to the Gateway via WiFi. The name should be similar to below.
   

   Image Removed

5. Add ending to GW

6. Once connected, navigate 192.168.55.1

7. Login with: user: admin password: admin

Check for Firmware Updates

1. Navigate to System → System Firmware

2. Press the "Check new firmware" button

3. If new firmware is available, update the firmware

4. If an update is installed, the gateway will reboot.

Enter Provisioning Code

1. Navigate to System → Overview

2. If the provisioning code is required, enter the following code depending on your Region.

AS923 - New Zealand/Asia

314022001923

AU915 - Australia

AE8722001036

EU868 - Europe

500020001900

The device will restart and you will need to:

1. Reconnect to the AP

2. Browse to http://192.168.55.1

3. Login with:
   user: Admin
   admin password: Admin admin

Set Frequency Band and Server

Server

1. Navigate to Packet Forward → Settings

2. Set the Server Address to the IP of your Nano. Different depending if you are connecting to the gateway via Wifi or Ethernet.

...

Frequency Band

1. Navigate to Packet Forward → Settings

2. Set Central Frequencies for Radio 0 and Radio 1 based on the frequency band of your region( see below)

AS923

Packet Forward → Settings → Radio 0

Packet Forward → Settings → Radio 1

AU915

Packet Forward → Settings → Radio 0

Packet Forward → Settings → Radio 1

EU868

Packet Forward → Settings → Radio 0

Packet Forward → Settings → Radio 1

...

Change Password

Wifi Password

1. Navigate to Network → Wireless

2. Set encryption to WPAWPA2-PSK

3. Enter new password in Key

...

Registering the Gateway on your Nano

The Nano acts as the LoRa Server for your local LoRa network. This server is accessible through the admin account and is where you add devices and gateways to your network.

1. Go to the URL monitor.nano.local:8080

2. login with:
   user: Admin
   admin password: Admin admin

3. Navigate to Gateways → Create

4. Enter your gateway’s details
   Gateway ID: Can be found at Packet Forward → Settings under Gateway Info above, first row.
   Name: choose Choose a name for your gateway

5. Click Create.The ‘Last Seen’ row should be updated when the gateway connects.
   

...

Test Gateway Connection

1. Navigate to Gateways → Femto-<last 6 digits of MAC>

2. Under Last Seen should be a recent time

...

...

Related articles