...
Power the Gateway and ensure the power light goes fixed green.
The SSID will be "AP-<Last 6 digits of MAC> and can be found on the back of the gateway.
Select the device and click Connect.
Open a Browser and browse to 192.168.55.1
Login with: user: admin password: admin
Check for Firmware Updates on the Gateway
Navigate to System → System Firmware
Press the "Check new firmware" button
If new firmware is available, update the firmware
If an update is installed, the gateway will reboot.
...
Navigate to Packet Forward → Settings
Set the Server Address to the IP of your Nano. Different depending . 192.168.12.1.
Will be different to below if you are connecting to the gateway via Wifi or Ethernet.
...
Frequency Band
Navigate to Packet Forward → Settings
Set Central Frequencies for Radio 0 and Radio 1 based on the frequency band of your region( see below)
...
Packet Forward → Settings → Radio 0
Central Frequency | 868100000? |
Packet Forward → Settings → Radio 1
Central Frequency | 868300000? |
Change Gateway WiFi AP Password
Wifi Password
| Warning |
|---|
It is very important you set a secure AP password. An open AP can provide an entry point into your local area network. |
Navigate to Network → Wireless
Set encryption to WPAWPA2-PSK
Enter new password in Key
...
Connect the Gateway to the Nano via WiFi
Registering the Gateway on your Nano
...