...
This article contains all the required information to configure and connect you your Gateway with to the NANO.
Connect to the Gateway via Wifi
Power the Gateway and ensure the power light goes fixed green.
The SSID will be "AP-<Last 6 digits of MAC> and can be found on the back of the gateway.
Select the device and click Connect.
Open a Browser and browse to 192.168.55.1
Login with: user: admin password: admin
Check for Firmware Updates on the Gateway
Navigate to System → System Firmware
Press the "Check new firmware" button
If new firmware is available, update the firmware
If an update is installed, the gateway will reboot.
Enter Provisioning Code
Navigate to System → Overview
If the provisioning code is required, enter the following code depending on your Region.
AS923 - New Zealand/Asia
...
| Code Block |
|---|
314022001923 |
AU915 - Australia
...
| Code Block |
|---|
AE8722001036 |
The device will restart and you will need to:
Reconnect to the AP
Browse to http://192.168.55.1
Login with: user: admin password: admin
Set Frequency Band and Server
Point Gateway to the NANO
Server
Navigate to Packet Forward → Settings
Set the Server Address to the IP of your Nano. 192.168.12.1.
Will be different to below if you are connecting to the gateway via Ethernet.
...
Frequency Band
Navigate to Packet Forward → Settings
Set Central Frequencies for Radio 0 and Radio 1 based on the frequency band of your region( see below)
AS923
Packet Forward → Settings → Radio 0
...
Central Frequency
...
923500000
Packet Forward → Settings → Radio 1
...
Central Frequency
...
924300000
AU915
Packet Forward → Settings → Radio 0
...
Central Frequency
...
917100000
Packet Forward → Settings → Radio 1
...
Central Frequency
...
917900000
Change Gateway WiFi AP Password
| Warning |
|---|
It is very important you set a secure AP password. An open AP can provide an entry point into your local area network. |
Navigate to Network → Wireless
Set encryption to WPAWPA2-PSK
Enter new password in Key
...
NANO in the local network. (This can be found in your local DHCP server or in your Static IP assignation table).
...
| Note |
|---|
Please note that if you have received a pre-configured system you can skip the following steps. |
Connect the Gateway to the
...
NANO via WiFi
Navigate to Network → WAN
Select the Wireless Extender tab near the top
Change Extender mode to enableand click Scan
Now from the drop-down menu beside Scan, Select your Nano NANO (NANO-XX)
Enter the Password you just created above into the Key field
Click Save and the Gateway will Reboot.
...
Registering the Gateway on
...
the NANO’s LoRaServer
The Nano NANO acts as the LoRa Server for your local LoRa network. This server is accessible through the admin account and is where you add devices and gateways to your network.
Reconnect to your NanoNANO like you did before
Go to the URL monitor.nano.local:8080
login with: user: admin password: admin
Navigate to Gateways → Create
Enter your gateway’s details
Gateway ID: Can be found at Packet Forward → Settings under Gateway Info, first row.
Name: Choose a name for your gatewayClick Create.
...
Test Gateway Connection
Navigate to Gateways → Femto-<last 6 digits of MAC>
Under Last Seen should be a recent time
...
Registering your gateway
...
on the
...
NANO
If you’d like to see uptime information about your gateway, we can add it to the platform.
Navigate to your dashboard.
Go to the IQNexus marketplace ('DevelopersDevices' → ‘IQNexus marketplace’).
Find a driver called ‘Loraserver Gateway’, and from the action menu select ‘New Device’.
Under DevEUI, fill in the gatewayID, for example '80029c4939c9'
Under name, fill in the name of the gateway, for example ‘Femto-48D62C’
If you have modbus Modbus or bacnet BACnet enabled, please fill in your modbusModbus/bacnet BACnet details.
Next, at the message calculator, fill in how many messages you would be expecting and for how long you’d like to store the messages.
Fill in the remaining configuration and press ‘Apply’.
You will be taken to the gateway list page, also accesable accessible through ‘Devices’ → ‘Gateways’.
You can now select a gateway and view the associated data.
...
| Info |
|---|
If you have any issues, please Contact us. |
...
| Page Properties | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
|