...
This article contains all the required information to configure and connect you your Gateway with to the NANO.
Connect to the Gateway via Wifi
Power the Gateway and ensure the power light goes fixed green.
The SSID will be "AP-<Last 6 digits of MAC> and can be found on the back of the gateway.
Select the device and click Connect.
Open a Browser and browse to 192.168.55.1
Login with: user: admin password: admin
Check for Firmware Updates on the Gateway
Navigate to System → System Firmware
Press the "Check new firmware" button
If new firmware is available, update the firmware
If an update is installed, the gateway will reboot.
Enter Provisioning Code
Navigate to System → Overview
If the provisioning code is required, enter the following code depending on your Region.
AS923 - New Zealand/Asia
...
| Code Block |
|---|
314022001923 |
AU915 - Australia
...
| Code Block |
|---|
AE8722001036 |
The device will restart and you will need to:
Reconnect to the AP
Browse to http://192.168.55.1
Login with: user: admin password: admin
Set Frequency Band and Server
Point Gateway to the NANO
Server
Navigate to Packet Forward → Settings
Set the Server Address to the IP of your NANO . 192.168.12.1.
Will be different to below if you are connecting to the gateway via Ethernet.
...
Frequency Band
Navigate to Packet Forward → Settings
Set Central Frequencies for Radio 0 and Radio 1 based on the frequency band of your region( see below)
AS923
Packet Forward → Settings → Radio 0
...
Central Frequency
...
923500000
Packet Forward → Settings → Radio 1
...
Central Frequency
...
924300000
AU915
Packet Forward → Settings → Radio 0
...
Central Frequency
...
917100000
Packet Forward → Settings → Radio 1
...
Central Frequency
...
917900000
Change Gateway WiFi AP Password
| Warning |
|---|
It is very important you set a secure AP password. An open AP can provide an entry point into your local area network. |
Navigate to Network → Wireless
Set encryption to WPAWPA2-PSK
Enter new password in Key
...
in the local network. (This can be found in your local DHCP server or in your Static IP assignation table).
...
| Note |
|---|
Please note that if you have received a pre-configured system you can skip the following steps. |
Connect the Gateway to the NANO via WiFi
...
| Page Properties | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
|