...
We recommend configuring your device by downlink next.
...
Elster V210
...
| Info |
|---|
The k: 1:1 at the top right of the device indicates the number of liters per pulse. e.g. 1 liter to 1 pulse. |
...
We recommend configuring your device by downlink next.
...
Sensus MeiTwin 50
Some water flow rates vary enough that double water meters are employed, One that is capable of higher precision and one that is for higher flow rates.
...
Count 1 logs each pulse from one of the water meters and Count 2 the other meter.
Elster V100
...
Connection
Remove the lid of the box by unscrewing the 4 screws on top
Unscrew the cap of the gland and remove the rubber grommet found inside.
Pass the cap of the gland through the water meter cable and then pass the rubber grommet afterwards.
Pass the cable of the meter through the gland into the inside of the box.
Now that the wires are inside the package they are to be connected to the board through the green connector. Hold down connector buttons to open and release the individual connections. Connect wires according to the figure below.
Blue/Black | Yellow | Empty | Red | Red | Black |
|---|---|---|---|---|---|
GND (Left) | Tamper | Direction | Count 1 | 3.3V | GND (Right) |
Related articles
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...