Adding a device to the Platform creates a virtual instance of your device where you can manage data, track location and create alerts to respond to unexpected events.
Data from these devices can then be visualised, monitored and controlled from within the Platform. For example, a device can be an IQnexus Temperature sensor transmitting via Sigfox or a Smart Water Meter transmitting water consumption via LoRA.
Find your device’s driver
Every Sensum device has an associated driver that tells the platform how the incoming data is formatted.
You will need to know your devices driver.
If you haven’t already, create a Sensum account and log in.
Navigate to your projects devices and select Sensum Market at the top right of your screen.
Search for your device's driver using the Driver Name field. (find your driver here)
Select Actions → New Device from the menu to the right of the driver.
Device Info
Complete the form to set-up your device info.
Depending on your device and driver you may see some or all of the following fields.
A Name is required of all devices and must unique to the platform. Alpha-numeric characters with spaces, - and _ are allowed. e.g. 12_Smith_st Smart-meter
A DevEUI is required of LoRa devices and is your device ID on the LoRa network. Find yours here.
ID Sigfox is required of Sigfox devices and is your device ID on the Sigfox network. Contact us if you don’t have this
A Location can be set for every device by dragging the pin on the map tool or entering an address
The Motion field sets if the device is static or in constant motion.
The Credential field is a token that is sometimes required depending on your IoT network.
A MODBUS Unit Identifier is also sometimes required of all devices. This is a number unique between the devices in your project. e.g. 63
MODBUS Master IP Address enter: 1.0.0.0
If an error or warning shows when you click apply. It is likely one of the above fields is incorrect or not unique. If you continue to have issues, please, contact us.