Connecting the Gateway

The LoRa Gateway included is easy to configure and connect to your NANO and provides the link between the NANO platform and your devices. Depending on the number of devices and area you are covering, you may need more than one gateway.

This article contains all the required information to configure and connect you Gateway with the NANO

Connect to the Gateway via Wifi

1. Power the Gateway and ensure the power light goes fixed green.

2. The SSID will be "AP-<Last 6 digits of MAC> and can be found on the back of the gateway.
   

   

3. Select the device and click Connect.

4. Open a Browser and browse to 192.168.55.1

5. Login with: user: admin password: admin

Check for Firmware Updates on the Gateway

1. Navigate to System → System Firmware

2. Press the "Check new firmware" button

3. If new firmware is available, update the firmware

4. If an update is installed, the gateway will reboot.

Enter Provisioning Code

1. Navigate to System → Overview

2. If the provisioning code is required, enter the following code depending on your Region.

AS923 - New Zealand/Asia

314022001923

AU915 - Australia

AE8722001036

The device will restart and you will need to:

1. Reconnect to the AP

2. Browse to http://192.168.55.1

3. Login with: user: admin password: admin

Set Frequency Band and Server

Server

1. Navigate to Packet Forward → Settings

2. Set the Server Address to the IP of your Nano. 192.168.12.1.
   Will be different to below if you are connecting to the gateway via Ethernet.

Frequency Band

1. Navigate to Packet Forward → Settings

2. Set Central Frequencies for Radio 0 and Radio 1 based on the frequency band of your region( see below)

AS923

Packet Forward → Settings → Radio 0

Packet Forward → Settings → Radio 1

AU915

Packet Forward → Settings → Radio 0

Packet Forward → Settings → Radio 1

Change Gateway WiFi AP Password

1. Navigate to Network → Wireless

2. Set encryption to WPAWPA2-PSK

3. Enter new password in Key

Connect the Gateway to the Nano via WiFi

1. Navigate to Network → WAN

2. Select the Wireless Extender tab near the top

3. Change Extender mode to enable and click Scan

4. Now from the drop-down menu beside Scan, Select your Nano (NANO-XX)

5. Enter the Password you just created above into the Key field

6. Click Save and the Gateway will Reboot.

Registering the Gateway on your Nano

The Nano acts as the LoRa Server for your local LoRa network. This server is accessible through the admin account and is where you add devices and gateways to your network.

1. Reconnect to your Nano like you did before

2. Go to the URL monitor.nano.local:8080

3. login with: user: admin password: admin

4. Navigate to Gateways → Create

5. Enter your gateway’s details
   Gateway ID: Can be found at Packet Forward → Settings under Gateway Info, first row.
   Name: Choose a name for your gateway

6. Click Create.

Test Gateway Connection

1. Navigate to Gateways → Femto-<last 6 digits of MAC>

2. Under Last Seen should be a recent time

Related articles

• Page:
  How change your Project Settings
• Page:
  How to add devices to the platform
• Page:
  How to Add a New Driver
• Page:
  How to set alert thresholds
• Page:
  How to add devices to a zone