Gateways

On the Gateway page ('Devices' → ‘Gateways’) you can view your gateways and the last time they received/send a message from/to a device. When setup, it looks like this:

Open

To add a gateway, go to the IQNexus market, select either ‘Loraserver Gateway’ or ‘Chirpstack Gateway’ and select new device.

Open

DevEUI - This is the euid of the gateway. If this is a gateway pointing to TTI it should have a 'EUI-' prefix.
Name - The name you wish to associate with your gateway.

If you have modbus enabled for your project:
MODBUS Unit Identifier - ID you wish to associate with this device (must be unique, between 1 and 254)
MODBUS Master IP Address client IP address for MODBUS connection, set to 0.0.0.0 for open access.

If you have bacnet enabled on your project:
BACNet Unit Identifier - ID of your bacnet unit

You can setup and calculate the amount of message stored in the system.

Lets say we will recieve 1 message per minute on this gateway, and we would like to keep the data for 10 days, it will store a maximum of 14400 message on the system, taking up 36MB. Press apply when done. If not navigated back to ‘Devices’ → ‘Gateways’, navigate there and you will see your new gateway. It will show as active as soon as it recieves a message.